|
|
|
 |
| Home | Group | Publications | Dr. Garmestani | Overview | Facility |
|
Publications
|
|||
| 2008 | |||
|
1-
Hoda Amani Hamedani,
Klaus-Hermann Dahmen, Dongsheng
Li, Houman Peydaye-saheli and Hamid Garmestani, Fabrication of
gradient porous LSM cathode by
optimizing deposition parameters in ultrasonic spray pyrolysis,
Accepted for
publication in Materials Science & Engineering B <pdf>
2- M. K. Singh, T. Shokuhfar, J. J. de Almeida Gracio, A. C. Mendes de Sousa, J. M. Da Fonte Fereira, H. Garmestani, S. Ahzi Hydroxyapatite Modified with Carbon Nanotube-Reinforced Poly(methyl methacrylate): A Novel Nanocomposite Material for Biomedical Applications, Adv. Funct. Mater. 2008, 9999, 1–7. <pdf> 3- S Saheli, H. Garmestani, A. Gokhale, Homogenization Relations for Elastic Properties of Two Phase Composites Using Two-Point Statistical Functions, accepted in the International Journal of Physics and Mechanics of Solids. P85-107, Vol. 3, No. 1, 2008 4- D.S. Li, H. Garmestani, A.O. Chu, H. Ahzi, G. Alapati, M. Khatonabadi, O.S. Es-Said, M.T. Siniawski, L. Matrisciano, S. Ahzi, Wear resistance and microstructure in annealed ultra high molecular weight polyethylenes, Journal of Polymer Science, Series A, Polymer Chemistry. May issue of "Polymer Science", vol. 50, n. 5, 2008 <pdf> |
|||
| 2007 | |||
1-
D.S. Li, H. Garmestani, S. Ahzi,
Processing path
optimization to achieve desired texture in polycrystalline materials,
Acta
Materialia 55 (2007) 647–654.
2- Sheikh-Ali AD, Garmestani H, Evolution of surface and bulk textures during superplastic deformation in a zinc alloy, MATERIALS LETTERS 61 (2): 478-481 JAN 2007 3- H. Garmestani, D.S. Li, M.A. Khaleel. Microstructure sensitive design and quantitative prediction of effective conductivity in fuel cell design. Materials Science Form, 2007, vol 561-565. 4- Camponeschi, E., Vance, R., Al-Haik, M., Garmestani, H., Tannenbaum, R.; Properties of Carbon Nanotube Polymer Composites in a Magnetic Field, Carbon, 2007. 45(10): 2037-2046 |
|||
| 2006 | |||
| 1- Li DS, Saheli G, Khaleel M, Garmestani, H., “Microstructure optimization in fuel cell electrodes using materials design”, CMC-COMPUTERS MATERIALS & CONTINUA 4 (1): 31-42 AUG 2006. <pdf> 2- B. Z. Cui, K. Han, H. Garmestani, H. J. Schneider-Muntau, “Structure and magnetic properties of FePt and FePt-Ag nanostructured magnets by cyclic cold rolling” Journal of Applied Physics, 99, 1, 2006. <pdf> 3- B. Z. Cui, K. Han, Y. Zhang, J. P. Liu, H. Garmestani, S. Liu, H. J. Schneider-Muntau, Magnetic-field-induced Crystallographic Texture Enhancement in cold-deformed FePt Nanostructured Magnets, Journal of Applied Physics, 100, 013902 (2006). <pdf> 4- Al-Haik, M.S., M.Y. Hussaini, H. Garmestani, “Prediction of Nonlinear Vicoelastic Behavior of Polymeric Composites Using an Artificial Neural Network”, International Journal of Plasticity 22 (2006), 1367-1392. 5- Yan S. S., Garmestani H., Tian Y. F., et al. Free boundary domain wall pinning model for the magnetization reversal in magnetic thin films, Japanese Journal Of Applied Physics Part 1-Regular Papers Brief Communications & Review Papers 45 (1a): 93-98 Jan 2006 6- Johnson F, Um CY, McHenry ME, et al., The influence of composition and field annealing on magnetic properties of FeCo-based amorphous and nanocrystalline alloys, Journal Of Magnetism and Magnetic Materials 297 (2): 93-98 Feb 2006. 7- Sheikh-Ali A.D., Molodov D.A. and Garmestani H., “Thermomagnetic Treatment of Zinc: Selective Grain Growth and Texture Modification,” Reviews of Advanced Materials Science, 2006, vol. 11, No 2, pp. 167-173. <pdf> 8- Park S. S., Garmestani H, Bae GT, et al. Constitutive analysis on the superplastic deformation of warm-rolled 6013 Al alloy, Materials Science And Engineering A-Structural Materials Properties Microstructure and Processing 435: 687-692 NOV 5 2006 9- D.S. Li, G. Saheli, M. Khaleel, H. Garmestani “Quantitative Prediction of Effective Conductivity in Anisotropic Heterogeneous Media Using Two–point Correlation Functions”, Computational Materials Science, 38, 1, 45-50 2006 <pdf> 10- Camponeschi E, Florkowski B, Vance R, et al. Uniform directional alignment of single-walled carbon nanotubes in. viscous polymer flow, Langmuir, 22 (4): 1858-1862 FEB 14, 2006. <pdf> 11- Dragomir IC, Castello-Branco GA, Ribarik G, et al. Burgers Vector Populations in hot rolled titanium determined by X-ray Peak Profile Analysis, ZEITSCHRIFT FUR KRISTALLOGRAPHIE : 99-104 Part 1 Suppl. 23 2006 |
|||
|
1- Gokhale AM, Tewari A, Garmestani H, Constraints on microstructural two-point correlation functions SCRIPTA MATERIALIA 53 (8): 989-993 OCT 2005 2- Cui, B. Z., C. T. Yu, K. Han, J. P. Liu, H. Garmestani, M. J. Pechan, and H. J. Schneider-Muntau, “Magnetization Reversal and Nanostructure Refinement in Magnetically Annealed Nd2Fe14B/a-Fe-type Nanocomposites”, J. Appl. Phys. 97, 10F308 (2005). <pdf> 3- Zubris M, King RB, Garmestani H, Tannenbaum R, FeCo nanoalloy formation by decomposition of their carbonyl precursors, Journal Of Materials Chemistry 15 (12): 1277-1285 2005 4- J. Bouhattate, D. Li, H. Garmestani, S. Ahzi, M. Khaleel “On Improving Predictions of Texture Evolution Using Processing Path Model” Materialwissenschaft Und Werkstofftechnik 36 (10): 538-540 Oct 2005 <pdf> 5- D.S. Li, H. Garmestani, B.L. Adams, "A texture evolution model in cubic-orthotropic polycrystalline system", International Journal of Plasticity, 21 (2005) 1591–1617. <pdf> 6- D. S. Li, J. Bouhattate, H. Garmestani, Processing Path model to describe texture evolution during mechanical processing, Materials Science Forum; Vols 495-497, pp 977-982, 2005. <pdf> 7- Bacatchuck Castello-Branco, Garemestani, Magnetic field effect on the microstructure of low silicon steel, Materials Science Forum, Vols 495-497, pp 1165-1170, 2005 8- M. Al-Haik and M. Y. Hussaini, H. Garmestani, Adhesion energy in carbon nanotube-polyethylene composite: Effect of Chirality JOURNAL OF APPLIED PHYSICS 97, 074306, 2005. <pdf> 9- G. Jefferson, H. Garmestani, R. Tannenbaum, E. Todd, “Two-point probability distribution functions: application to block co-polymer nanocomposites”, International Journal of Plasticity. 185–198, 2005. <pdf> 10- G. Saheli, H. Garmestani, B. L. Adams, Microstructure Design of a Two Phase Composite using Two-point Correlation Functions, international Journal of Computer Aided Design, Volume 11, Numbers 2-3, January 2004, Pages: 103 – 115. 11- Bacaltchuk CMB, Branco GAC, Garmestani H, et al. “High magnetic field effect on texture and grain growth of GNO silicon steel”, MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK 36 (10): 561-565 OCT 2005 12- I. C. Dragomir, D.S. Li, G. A. Castello-Branco, H. Garmestani, R. L. Snyder, G. Ribarik and T. Ungar, "Evolution of dislocation density and character in hot rolled titanium determined by X-ray diffraction" Materials Characterization 55 (1): 66-74 Jul 2005 <pdf> 13- I. C. Dragomir, G. A. Castello-Branco, G. Ribarik, H. Garmestani, T. Ungar and R. L. Snyder "Burgers Vector Populations in hot rolled titanium determined by X-ray Peak Profile Analysis" by accepted for publication in Zeitschrift fur Kristallographie (2005). <pdf>
|
|||
|
1- D.S. Li, H. Garmestani, S.S. Yan etc., “Effect of High Magnetic Field Annealing on Texture and Magnetic Properties of FePd”, Journal of Magnetism and Magnetic Materials, Journal of Magnetism and Magnetic Materials, Volume 281, Issues 2-3 , October 2004, Pages 272-275 <pdf> 2- Johnson F, Garmestani H, Chu SY, et al., Induced anisotropy in FeCo-based nanocrystalline ferromagnetic alloys (HITPERM) by very high field annealing, IEEE TRANSACTIONS ON MAGNETICS 40 (4): 2697-2699 Part 2 JUL 2004 3- L. Meda, C. Bacaltchuk, K. Dahmen, H. Garmestani, X-ray Diffraction residual stress calculation in textured La2/3Sr1/3MnO3 thin film, Journal of Crystal Growth Vol 263/1-4 pp 185-191, 2004 4- B. Z. Cui, K. Han, Y. Zhang, J. P. Liu, H. Garmestani, S. Liu, H. J. Schneider-Muntau, Crystallization, Morphology and Magnetic Properties of Melt-spun (Nd,Pr,Dy)2(Fe,Co,Mo)14B/a-Fe Nanocomposites, IEEE. Trans. Magn., 40 (2004) 2867-2870. <pdf> 5- C.M.B. Bacaltchuk, M. G. A. Castello-Branco H. Garmestani, A.D. Rollett, “Effect of Magnetic Field Applied During Secondary Annealing on Texture and Microstructure of Non-oriented Silicon Steel, Journal of Materials and Manufacturing Processes, vol 19, issue 4, p611-617, (2004). 6- M.S. Al-Haik, H. Garmestani, A. Savran, “Explicit and implicit viscoplastic models for polymeric composite”, International Journal of Plasticity, Vol. 20, Issue, 10, Oct-2004 pp 1875-1907, 2004. <pdf> 7- Shi-shen Yan, C. Ren, X. Wang, Y. Xin, and Z. X. Zhou, L. M. Mei, M. J. Ren, Y. X. Chen and Y. H. Liu, H. Garmestani, Ferromagnetism and magnetoresistance of Co–ZnO inhomogeneous magnetic semiconductors, Appl. Phys. Lett. 84, No. 13 MARCH 2004. 8- Al-Haik MS, Garmestani H, Li DS, et al., Mechanical properties of magnetically oriented epoxy , Journal of Polymer Science Part B-Polymer Physics 42 (9): 1586-1600 MAY 1 2004. <pdf>
|
|||
|
1- H. Garmestani, M. S. Al-Haik, K. Dahmen, R. Tannenbaum, D. Li, S. S. Sablin, and Y. Hussaini, “Polymer-Mediated Alignment Of Carbon Nanotubes Under High Magnetic Fields”, Advanced Materials, Vol. 15, No. 22, Nov 17, 2003 <pdf> 2- G. A. Castello-Branco, Bacaltchuk, CMB, Garmestani, H, Effect of cold rolling on the annealing texture of a near-alpha titanium, MATER SCI FORUM 426-4: 701-706 2003. 3- Shi-Shen Yan, M. Elkawni, D. S. Li, and H. Garmestani, J. P. Liu, J. L. Weston and G. Zangari, Soft-hard exchange-coupled layered structures with modulated exchange coupling, Journal Of Applied Physics Volume 94, Number 7 1 October 2003. <pdf> 4- B. Z. Cui, K. Han, Y. Zhang, J. P. Liu, H. Garmestani, S. Liu, H. Schneider-Muntau, “Crystallization Behavior, Nanostructure and Magnetic Properties of Melt-spun (Nd,Pr,Dy)2(Fe,Co,Mo)14B/-Fe Nanocomposite Magnets”, accepted in IEEE. Transactions on Magnetics, 2004 5- E. S. Choi, J. S. Brooks, D. L. Eaton, M. S. Al-Haik and M. Y. Hussaini H. Garmestani and D. Li, K. Dahmen “Enhancement of thermal and electrical properties of carbon nanotube polymer composites by magnetic field processing”, Journal of Applied Physics, volume 94, Number 9, November 1sr, 2003. <pdf> 6- Bacaltchuk, CMB, Castello-Branco, GA, Gault, B, Garmestani, H. Effect of high magnetic field during primary annealing on texture of silicon steel MATER SCI FORUM 426-4: 3733-3738 2003 7- Sheikh-Ali AD, Garmestani H “Assessment of contribution of intragranular slip to grain boundary sliding in bicrystals” MATER SCI FORUM 447-4: 33-38 2003 <pdf> 8- C.M.B. Bacaltchuk, Ebrahimi M. G. A. Castello-Branco H. Garmestani, A.D. Rollett, “Effect of Magnetic Field Applied During Secondary Annealing on Texture and Grain size of Silicon Steel”. Scripta Materialia, vol 48, 1343-1347, (2003). <pdf> 9- A.D. Sheikh-Ali, D.A. Molodov and H. Garmestani, Migration and reorientation of grain boundaries in Zn bicrystals during annealing in a high magnetic field, pp 483-48, V. 48-5, 03-Mar-2003, Scripta Met. <pdf> 10- M.S. Al-Haik, H. Garmestani, and I.M. Navon, ” Truncated-Newton Training Algorithm for Neurocomputational Viscoplastic Model”, Comput. Methods Appl. Mech. Engrg.192 (2003)2249 –2267. <pdf> 11- A. Sheikh-Ali, Molodov, DA, Garmestani, H Boundary migration in Zn bicrystal induced by a high magnetic field, APPL PHYS LETT 82 (18): 3005-3007 MAY 5 2003 <pdf> 12- M. Iskandar, D. Reyes, Y. Gaxiola, E. Fudge, J. Foyos, E.W. Lee, P. Kalu, H. Garmestani, J. Ogren, O.S. Es-Said” On identifying the most critical step in the sequence of heat treating operations in a 7249 aluminum” Journal of Engineering Failure Analysis, Vol. 199-207, (2003). 13- D.S. Li, H. Garmestani, Scott Schoenfeld, “Evolution of Crystal Orientation Distribution Coefficients During Plastic Deformation”, Scripta Materialia, Volume 49, Issue 9, November 2003, 867-872 <pdf> 14- A. D. Sheikh-Ali, J. Szpunar and H. Garmestani, “Stimulation and Suppression of Grain Boundary Sliding by Intragranular Slip in Zinc Bicrystals” Interface Science, 11, 439-450, 2003 <pdf> 15- D. S. Li, H. Garmestani, R. G. Alamo, And S. R. Kalidindi, “The Role Of Crystallinity in The Crystallographic Texture Evolution Of Polyethylenes During Tensile Deformation”, Polymer 44 (18): 5355-5367 AUG 2003. <pdf>
|
|||
|
1- D. Li, H. Garmestani, “Texture Evolution and Stress Relaxation of Linear Low Density Polyethylene During Uniaxial Extension”, Polymeric Materials: Science and Engineering, 2002, 86, 398. 2- Sheikh-Ali AD, Molodov DA and Garmestani H, “Magnetically Induced Texture Development in Zinc Alloy Sheet”, Scripta Materialia, 2002, vol.46, p-857. <pdf> 3- M.L. Weaver, C.W. Calhoun and H. Garmestani, “Microstructure, Texture, and Mechanical Properties of Continuously Cast Gamma TiAl,” Journal of Materials Science, v. 37, n. 12, pages 2483-2490 (2002). 4- Iskandar, D. Reyes, Y. Gaxiola, E. Fudge, J, Foyos, E.W. Lee, P. Kalu, H. Garmestani, O.S. Es-Said, “The Effect of Varying the Solution Treatment Temperature, Natural Aging Treatment and Artificial Aging Treatment on the Mechanical Strength of 7249 Aluminum Alloy”, Materials Science Forum, Vols. 396-402 pp. 1121-1126, (2002) 5- B.L. Adams, M. Lyon, B. Henrie, S.R. Kalidindi and H. Garmestani, “Spectral Integration of Microstructure and Design”, Materials Science Forum Vols. 408-412 (2002) pp. 493-498 6- H. Garmestani. S. R. Kalidindi, L. Williams, E. W. Lee, O. S. Es-Said, “Evolution of Anisotropy In Al-Li 2090-T8E41 Alloy: Experiments and Modeling”, The International Journal of Plasticity, pp 1373-1393, International Journal of Plasticity, Vol 18 Iss 10, Oct, 2002. <pdf> 7- M. AlHaik, H. Garmestani, “A Composite Cylinder Model for the Prediction of Residual Stresses in Gamma Titanium Composites", Journal of Materials Engineering and Performance, Volume 11(5) October 2002. <pdf> 8- A.D. Sheikh-Ali, D.A Molodov and H. Garmestani, Texture Development in Zn-1.1%Al under Strong Magnetic Field, Trans Tech Publications, Materials Science Forum Vols. 408-412 (2002) pp. 961-966. 9- Han K, Ishmaku A, Xin Y, Garmestani H, Toplosky VJ, Walsh R, Swenson C, Lesch B, Ledbetter H, Kim S, Hundley M, Sims JR Mechanical properties of MP35N as a reinforcement material for pulsed magnets, IEEE Transactions on Applied Superconductivity, 12 (1): 1244-1247 MAR 2002 <pdf>
|
|||
|
1- H. Garmestani, M. Vaghar, E. W. Hart, “A unified model for inelastic deformation of polycrystalline materials –application to transient behavior in cyclic loading and relaxation”, International Journal of Plasticity. Vol. 17, no. 10, pp 1367-1391October, 2001. <pdf> 2- Y. Xin, K. Han, N. Mateeva, H. Garmestani, P.N. Kalu, K. H. Dahmen, “Microstructures of La(1-x)A(x)(A = Ca or Sr)MnO3-delta thin films by liquid-delivery metalorganic chemical vapor deposition”, Journal of Materials Research, 16 (11): 3073-3083 NOV 2001 <pdf> 3- M. Al-Haik, H. Garmestani, “Durability Study of a Polymeric Composites for Structural Applications”, Journal of Polymer Composites, vol. 22, No. 6, December 2001 <pdf> 4- H. Garmestani, M. A. Zikry, “Inelastic Deformation and Failure”, International Journal of Plasticity, Editorial, Volume 17, Issue 10, October 2001, Pages 1303-1304 5- B. L. Adams, A. Henrie, B. Henrie, M. Lyon, S. R. Kalidindi, H. Garmestani, “Microstructure-Sensitive Design of A Compliant Beam”, J. Mech. Phys. Solids 49 (8): 1639-1663 Aug 2001 <pdf> 6- L. Meda, L Kennon, Cristiane Bacaltchuk, H. Garmestani, K. H. Dahmen, “Effects of thermal annealing on the texture of La0.67Sr0.33MnO3 thin films”, Journal of Materials Research, July 2001 Vol. 16, No. 7. <pdf> 7- D. Li, H. Garmestani, S. Kalidindi, and R. Alamo, “Crystallographic Texture Evolution in High Density Polyethylene During Uniaxial Tension”, Polymer, Vol. 42, (2001), pp. 4903-4913. <pdf> 8- A. D. Sheikh-Ali; H. Garmestani, “On the independent behavior of grain boundary sliding and intragranular slip during superplasticity”, Trans Tech Publications, Materials Science Forum, vol. 357-359, pp. 393-398, 2001. <pdf> 9- L. Meda, C. Bacaltchuck, K.H-Dahmen, H. Garmestani, “Residual strain and texture in strontium-doped lanthanum manganite thin films”, J. Mater. Sci. Mater. Electron 12, 143-146 (2001). <pdf> 10- R. Vaghar, H. Garmestani, “Three Dimensional Stress Analysis of Superconducting Magnets Using Green's Function Solution", Journal of Applied Mechanics. J App. Mech-T ASME 68 (1): 11-18 Jan 2001 <pdf> 11- H. Garmestani, S. Lin, B. Adams, S. Ahzi, “Statistical Continuum Theory for Texture Evolution of Polycrystals”, Journal of the Mechanics and physics of Solids 49, (2001) 589-607. <pdf> 12- M. Al-Haik, M.R. Vaghar, H. Garmestani, M. Shahawy, “Viscoplastic analysis of structural polymer composites using stress relaxation and creep data”, Composites: Part B 32 (2001) 165–170 <pdf> 13- H. Garmestani, M. Al-Haik, T. A. Townsley and C. Sabinash, Residual Stress Development During Fabrication and Processing of Gamma-Titanium Based Composites,” Scripta Met. Volume 44:1, pp 179-185, Jan, 2001. <pdf>
|
|||
|
1- H. Garmestani, X. Dong, L. Brandao, H. Dahmen, “Texture analysis in LD-MOCVD Processed Thin Film Giant Magnetoresistant (LaM)MnO3 Materials”, Journal of Textures and Microstructures, Vol 34/2-3, pp 65-74, 2000. <pdf> 2- S. Lin, H. Garmestani, B. Adams, “The Evolution of Probability Functions in an Inelastically Deforming Two-Phase Medium”, International journal of solids and structures, Vol. 37, N. 3, pp. 423, 2000. <pdf> 3- H. Garmestani, S. Lin, “Statistical Continuum Mechanics Analysis of an Elastic Two-Isotropic-Phase Composite Material”, Journal of Composites: Part B, vol. 31, (2000) 39-46. <pdf> 4- M. Trinca, A. Avalino, H. Garmestani, J. Foyos, E. W. Lee and O. S. Es-Said, “Effect of Rolling Orientation on the Mechanical Properties and Crystallographic Texture of 2195 Aluminum-Lithium Alloy”, Materials Science Forum Vols 331-337, P849-854, 2000 5- D. W. Markiewicz, M. R. Vaghar, Iain R. Dixon, “Generalized plane strain analysis of superconducting solenoids”, H. Garmestani, Journal of applied physics., Vol. 86, N. 12, pp. 7039, 1999 <pdf> 6- H. Garmestani, K. Harris, “Orientation Determination by EBSP in an Environmental Scanning Electron Microscope”, Scripta Materialia 41: (1) 47-53 JUN 4 1999 <pdf> 7- E. W. Lee, P. N. Kalu, L. Brandao, O. S. Es-Said, J. Foyos, H. Garmestani, “The effect of off-axis thermomechanical processing on the mechanical behavior of textured 2095 Al-Li alloy”, Journal of Materials Science and Engineering, A265 (1999), P100-109. <pdf> 8- M.L. Weaver, L.P.M. Brandao, E.S. Gillman, K.H. Dahmen, and H. Garmestani, “Microcharacterization of LD-MOCVD Processed Thin Film Materials Exhibiting Giant Magnetoresistance,” Journal of Materials Research, Vol. 14, No. 5, May 1999. P2001-2007. 9- F. Booeshaghi and H. Garmestani, “On the Application of Load Relaxation in Characterizing Superplastic Al-Li 8090 Over Large Strain-Rate Regimes”, Journal of Scripta Materialia, P-1359-6462, Volume : 40, Issue : 4, 15-Feb-1999 <pdf> 10- N. Bednar, H. Garmestani, “Biaxial Testing of High Strength Carbon Fiber Composite Cylinders for Pulsed Magnet reinforcement”, Journal of Composites, Part A: Applied Science and Manufacturing, 30/2, 147-152 Dec.1998 <pdf> 11- F. Booeshaghi, H. Garmestani, “On the Existence of a Threshold Stress in Al-Li Superplastic Materials”, Scripta Materialia, Vol. 38, No. 1, pp. 89-94,1998. <pdf> 12- M.A. Zikry H. Garmestani, “Deformation and failure modes in multiphase materials”, Special issue: Int. J. Plasticity 14: (8) 671-671 1998 13- S. Lin, B. L. Adams, “Statistical continuum theory for inelastic behavior of two-phase medium”, H. Garmestani, Int. J. Plasticity 14: (8) 719-731 1998 <pdf> 14- H. Garmestani, P. Kalu, D. Dingley, “Micro-characterization of Al-8090 Superplastic Materials using Orientation Imaging Microscopy”, Journal of Materials Science and Engineering A. volume 242/1-2. pp 284-291, February 1998. <pdf> 15- M. L. Weaver, H. Garmestani, “Microstructures and Mechanical Properties of Commercial Titanium Foils Processed via the Melt Overflow Process”, Materials Science and Engineering A, v. A247, pages 229-238 (1998). <pdf> 16- K.E. Harris, F. Ebrahimi, and H. Garmestani, “Texture Evolution in NiAl”, Journal of Materials Science and Engineering A. Volume 247 (1998) 187-194 <pdf> 17- H. Garmestani, F. Booeshaghi, P. Kalu, “Micromechanical Investigation and Phenomenological Modeling of Al-8090 Superplastic Materials”, Materials Science Forum, vol. 243-245, 1997, pp. 569-574. <pdf> 18- J. Schwartz, Amm B. C., Garmestani H, et al., “Mechanical properties and strain effects in Bi2Sr2CaCu2Ox/AgMg composite conductors”, IEEE T APPL SUPERCON 7: (2) 2038-2041 Part 2 JUN 1997 19- R. Vaghar, H. Garmestani, D. Markiewics, “Elastoplastic Stress Analysis of Nb3Sn Superconducting Magnets”, Journal of Applied Physics, August 1996.Vol. 80, n4, p2490-2500, Aug 1996. <pdf> 20- A. Cox, D. Markiewics, H. Garmestani, I. Dixon, “Power Series Stress Analysis of Solenoid Magnets”, IEEE Transactions on Magnetics VOL. 32. NO. 4. July 1996. <pdf> 21- H. Garmestani, K. Harris, P. Kalu, “Orientation Imaging Microscopy in Environmental Scanning Electron Microscopy”, Journal Scanninig Microscopies, Vo. 20, 1 (1996). <pdf> 22- S. Mukherjee, H. Garmestani, N. Chandra, "Experimental Investigation of Thermal Stresses in MMCs Using Backscattered Kikuchi Diffractomery Method", Scripta Metallurgica et Materialia, Vol. 33, No.1, pp. 93-99, February 1995. <pdf> 23- H. Garmestani, R. Vaghar, D. Markiewics, N. Chandra, "Stress Analysis of an Anisotropic Work Hardening Cylinder with Body Forces", International Journal of Mechanics of Structures and Machines, Vol. 23, No.4, November 1995. 24- N. Chandra, K. Murali, and H. Garmestani, "Experimental and Numerical Investigation of Superplastic Deformation Mechanisms" Materials Science Forum Vols. 170-172 (1994) pp.47-52 <pdf> 25- H. Garmestani, R. Vaghar, W.D. Markiewics, "Concepts of Plasticity in Solenoid Stress Analysis," IEEE Transactions on Magnetics, VOL. 30, NO. 4, July 1994, PP. 2237-2240. <pdf> 26- W.D. Markiewics, M. R. Vaghar, I.R. Dixon, and H. Garmestani, "Generalized Plane Strain Analysis of Solenoid Magnets," IEEE Transactions on Magnetics, VOL. 30, NO. 4, JULY 1994, PP. 2233-2236. <pdf> 27- N. Chandra, C.R. Ananth, and H. Garmestani, "Micromechanical Modeling of Process-Induced Residual Stresses in Ti-24Al-11Nb/SCS-6 Composite," Journal of Composite Technology & Research, JCTRER, Vol. 16, No. 1, January 1994, PP. 37-46. <pdf> 28- E.W. Hart, H. Garmestani, "Mechanical Testing Using Direct Control of the Inelastic Strain Rate", Journal of Experimental Mechanics, 33 (1), March 1993, pp 1-6. 29- C. R. Ananth, N. Chandra, H. Garmestani, "Process Induced Residual Stresses in Metallic/Intermetallic Matrix Composites", Computational Plasticity: Fundamentals and Applications, 1992, Ed. D.R.J. Owen, et. al., Pineridge Press, 2205-2216. 30- H. Garmestani, E. W. Hart, “Controlled Inelastic Strain Rate Experiments”, JOM, J. Min. Met. Mat. Sci., vol 40, (7), A55, Jul 1988. 31- Hamid Garmestani, Brent Adams, "Transient Small-Scale Yield Behavior of Textured Copper Tubing Under Biaxial Loading", Journal of Engineering Materials and Technology, 108, 127-134 April 1986.
|
|||
|
1- Effective conductivity in isotropic heterogeneous media usinga strong-contrast statistical continuum theory A.Mikdam, A.Makradi, S.Ahzi a, H.Garmestani, D.S.Li, Y.Remond, Accepted in the Journal of the Mechanics and Physics of Solids 2- Omar Hatamleh, Preet M. Singh, and Hamid Garmestani Stress Corrosion Cracking Behavior of Peened FrictionStir Welded 2195 Aluminum Alloy Joints, Omar Hatamleh, Preet M. Singh, and Hamid Garmestani, accepted to the Journal of Materials Engineering and Performance 3- D.S. Li, H. Garmestani, S.C. Davis, L.K. Moss, A.K. Siddiqi, J.B. Guthrie, N. Johansen, L. Matrisciano Improving wear resistance of ultra high molecular weight polyethylenes by Uniaxial Compression, Submitted to the JMBBM 4- Dongsheng Li, Anthony D Rollett, Greg Vialle, Hamid Garmestani, “Multi-property Microstructure and Property Design of Magnetic Materials, accepted for JEMT. .
|
|||
|
1- A. Belvin, A. Gokhale, N. Thadhani, H. Garmestani, Application of Two-Point Probability, Distribution Functions to Predict Properties of Heterogeneous Two-Phase Materials, submitted to materials Characterization.
|
|||
|
1- "Advances in Superplasticity and Superplastic Forming", Edited by N. Chandra, H. Garmestani, R. E. Goforth, A TMS Publication, Proceedings of a Symposium sponsored by the MDMD Shaping and Forming Committee, held at the TMS/ASM Materials Week 2-5 November, 1992.
2- Deformation and failure modes in multiphase materials”, Zikry MA, Garmestani H, Special issue: Int. J. Plasticity 14: (8) 671-671 1998.
3- Special issue on: "Inelastic Deformation and Failure" in honor of Professor E.W. Hart on his 80th birthday – Editorial, INT J PLASTICITY 17 (10): 1303-1304 2001.
|
|||
|
1- "Experimental Methods in Solid Mechanics," H. Garmestani, Used for the junior level course in experimental mechanics in the Dept. of Mechanical Engineering at FAMU/FSU College of Engineering.
|