Home Group Publications Dr. Garmestani Overview Facility

    

     Important       Links:

LMM->Garmestani->Vitae

 

Hamid Garmestani

Georgia Institute of Technology

Materials Science and Engineering

Atlanta, GA 30332-0245

Tel: 404 3854495

hamid.garmestani@mse.gatech.edu

 

 

EDUCATION:

Doctor of Philosophy, Cornell University , Theoretical and Applied Mechanics, May 1989.  Minor: Materials

Science and Engineering.

Advisor:  Professor E. W. Hart

Master of Science, University of Florida , Materials Science and Engineering, June 1984.  Minor: Engineering

Sciences and Mechanics.

Advisor: Professor B. L. Adams

Bachelor of Science University of Florida , Mechanical Engineering, June 1981`

 

 

RESEARCH EXPERIENCE:

       

                Georgia Institute of Technology:  Professor, Spring 2003

FAMU/FSU Mech. Eng. / MARTECH  Professor:  August 2000 –2002

Associate Professor:  1995-2000

                Assistant Professor:  August 1990-1994

                Yale University   December 1988 -  July 1990

                Associate Research Scientist

 

RESEARCH INTEREST:

Dr. Garmestani’s research is focused on microstructure/property relationship in advanced materials including textured polycrystalline, composites, superplastic, magnetic and thin film layered structures. Using statistical continuum mechanics (higher order probability functions) and neural network approaches, the microstructure of these materials (texture, microtexture) are correlated with property and processing conditions.  Microscopy techniques such as SEM/TEM together with OIM and x-ray texture analysis have been used to obtain mesoscopic information in polycrystalline (and semi-crystalline polyethylene) materials.  Special attention was given to in-situ characterization of materials. As an example, the effect of strain on magnetic properties of magnetic sensors were measured using an insitu microtensile stage. Several processing paths including superplasticity, cross-rolling, and Chemical Vapor Deposition (CVD) have been investigated for their contribution to texture and grain boundary character distribution.  More recently, high temperature magnetic annealing has been used as a new process for texturing of magnetic materials and the production of highly oriented nano-magnets. 

Dr. Garmestani is a member of the editorial board of the Metallurgical and Materials Transactions and International Journal of Plasticity.  He is presently funded through the army, NSF and NASA.  He was the primary investigator in the acquisition of three major instrumentation proposals through NSF, and NASA.

 

 PUBLICATIONS: Submitted (in review):

1-      L. Meda, C. Bacaltchuk, H. Garmestani “High Temperature Texturing of Neodynium Iron Boride Under High Magnetic Field”, Applied Physics letters.

2-    B. Z. Cui, C. T. Yu, D. S. Li, K. Han, H. Garmestani, J. P. Liu, M. J. Pechan, H. Schneider-Muntau “Crystallographic textures and enhanced in-plane magnetic anisotropy in magnetically annealed Nd2Fe14B/a-Fe-type nanocomposites”, submitted to the Journal of Applied Physics.

3-    A.D. Sheikh-Ali, J.A. Szpunar and H. Garmestani, “The Effect of Intragranular Slip on Grain Boundary Sliding in Incompatible Zinc Bicrystals”, Scripta Materialia .

4-    " Microscopic Strain Field Analysis for In-Situ Investigations ”, K. Harris, H. Garmestani, L. Lourenco, Submitted to the Journal Experimental Mechanics.

5-    E. Wright, Brandao, H Garmestani, M. Weaver, W. Brewer, “Texture and Microstructure of Alpha-2 Titanium sheet produced by plasma cast overflow process”, Submitted to Scripta Metallurgica.

6-    A.D. Sheikh-Ali and H. Garmestani, Evolution of Surface and Bulk Textures during Superplastic Deformation in a Zn-1.1%wt. Al alloy, Scripta Materialia (submitted). 

7-    H. Garmestani, A.D. Sheikh-Ali, The Effect of Crystallographic Texture on Grain Boundary Sliding during Superplastic Deformation in Zn-1.1%wt. Al Alloy, Scripta Materialia.   

 

PUBLICATIONS: Published

(Year 2005)

1-    D.S. Li, H. Garmestani, B.L. Adams, "A texture evolution model in cubic-orthotropic polycrystalline system", International Journal of Plasticity 21 (2005) 1591–1617. 

2-    G. Jefferson, H. Garmestani, R. Tannenbaum, E. Todd, “Two-point probability distribution functions: application to block co-polymer nanocomposites”, International Journal of Plasticity, 185–198, 2005. 

 

(Year 2004)

1-    F. Johnson, H. Garmestani, S. Y. Chu, M. E. McHenry, and D. E. Laughlin "Induced Anisotropy in FeCo-Based Nanocrystalline Ferromagnetic Alloys (HITPERM) by Very High Field Annealing"; IEEE TRANSACTIONS ON MAGNETICS, VOL. 40, NO. 4, JULY 2004. 

2-    D.S. Li, H. Garmestania, Shi-shen Yan, M. Elkawnic, M.B. Bacaltchukc, H.J. Schneider-Muntau, J.P. Liu, S. Saha, J.A. Barnard; "Effects of high magnetic field annealing on texture and magnetic properties of FePd". 

3-    M.S. Al-Haik, H. Garmestani, "A. Savran Explicit and implicit viscoplastic models for polymeric composite".  International Journal of Plasticity 20 (2004) 1875–1907. 

4-    C. Ren, X. Wang, Y. Xin, Z. X. Zhou, L. M. Mei, M. J. Ren, Y. X. Chen, Y. H. Liu, and H. Garmestani, " Ferromagnetism and magnetoresistance of Co–ZnO inhomogeneous magnetic semiconductors". Applied Physics Letters, Volume 84, Number 13,  (29th March 2004). 

5-    M. S. Al-Haik, H. Garmestani, D. S. Li, M.Y. Hussaini, S. S. Sablin, R. Tannenbaum, K. Dahmen, "Mechanical Properties of Magnetically Oriented Epoxy", Journal of Polymer Science: Part B: Polymer Physics, Vol. 42, 1586–1600 (2004)Wiley Periodicals, Inc.  

6-     B. Z. Cui, K. Han, Y. Zhang, J. P. Liu, H. Garmestani, S. Liu, H. Schneider-Muntau, “Crystallization Behavior, Nanostructure and Magnetic Properties of Melt-spun (Nd,Pr,Dy)2(Fe,Co,Mo)14B/a-Fe Nanocomposite Magnets”, accepted in IEEE. Transactions on Magnetics, 2004.  

 

(Year 2003)

1-    Bacaltchuk, CMB, Castello-Branco, GA, Gault, B, Garmestani, H.  Effect of high magnetic field during primary annealing on texture of silicon steel MATER SCI FORUM 426-4: 3733-3738 (2003).  

2-    A.D. Sheikh-Ali, D.A. Molodov and H. Garmestani, Migration and reorientation of grain boundaries in Zn bicrystals during annealing in a high magnetic field, pp 483-48, V. 48-5, 03-Mar-2003, Scripta Met. 

3-    C.M.B. Bacaltchuk,  M. Ebrahimi M. G. A. Castello-Branco H. Garmestani, A.D. Rollett, “Effect of Magnetic Field Applied During Secondary Annealing on Texture and Grain size of Silicon Steel”. Scripta Materialia, vol 48, 1343-1347, (2003). 

4-    A. Sheikh-Ali, Molodov, DA, Garmestani, H Boundary migration in Zn bicrystal induced by a high magnetic field , APPL PHYS LETT 82 (18): 3005-3007 MAY 5 2003. 

5-    D.S. Li, H. Garmestani, Scott Schoenfeld, “Evolution of Crystal Orientation Distribution Coefficients During Plastic Deformation”, Scripta Materialia,    Volume 49, Issue 9, November 2003, 867-872.  

6-    G. A. Castello-Branco, Bacaltchuk, CMB, Garmestani, H, Effect of cold rolling on the annealing texture of a near-alpha titanium, MATER SCI FORUM 426-4: 701-706 (2003). 

7-    M.S. Al-Haik, H. Garmestani, and I.M. Navon, " Truncated-Newton Training Algorithm for Neurocomputational Viscoplastic Model”, Comput. Methods Appl. Mech. Engrg.192 (2003)2249 –2267.  

8-    A.D. Sheikh-Ali, J.A. Szpunar  and H. Garmestani, Stimulation and Suppression of Grain Boundary Sliding by Intragranular Slip in Zinc Bicrystals, Interface Science.- 2003, v.11, pp. 439-450.  

9-     M. Iskandar, D. Reyes, Y. Gaxiola, E. Fudge, J. Foyos, E.W. Lee, P. Kalu, H. Garmestani, J. Ogren, O.S. Es-Said "On identifying the most critical step in the sequence of heat treating operations in a 7249 aluminum” Journal of Engineering Failure Analysis, Vol. 199-207, (2003). 

10-    H. Garmestani, M. S. Al-Haik, K. Dahmen, R. Tannenbaum, D. Li, S. S. Siblin, and M. Y. Hussaini, "Polymer-Mediated Alignment of Carbon Nanotubes Under High Magnetic Fields". Adv. Mater. (2003) 15, No. 22, November 17. 

11-    D. S. Li, H. Garmestani, R. G. Alamo, And S. R. Kalidindi, “The Role Of Crystallinity in The Crystallographic Texture Evolution Of Polyethylenes During Tensile Deformation”, Polymer 44 (18): 5355-5367 AUG 2003. 

12-    E. S. Choi, J. S. Brooks, D. L. Eaton, M. S. Al-Haik and M. Y. Hussaini H. Garmestani and D. Li, K. Dahmen ³Enhancement of thermal and electrical properties of carbon nanotube polymer composites by magnetic field processing², Journal of Applied Physics, volume 94, Number 9, November 1st, 2003. 

13-    H. Garmestani, M. S. Al-Haik, K. Dahmen, R. Tannenbaum,  D. Li, S. S. Sablin, and Y. Hussaini, “Polymer-Mediated Alignment Of Carbon Nanotubes Under High Magnetic Fields”, Advanced Materials, Vol. 15, No. 22, Nov 17, 2003. 
 

(Year 2002)

1-    A.D. Sheikh-Ali, D.A Molodov and H. Garmestani, Texture Development in Zn-1.1%Al under Strong Magnetic Field, Trans Tech Publications, Materials Science Forum Vols. 408-412 (2002) pp. 961-966. 

2-    A.D. Sheikh-Ali, J.A. Szpunar and H.Garmestani, Grain Boundary Sliding during Creep: Role of Boundary Misorientation and Strain Compatibility, Minerals, Metals and Materials Society/AIME, Creep Deformation: Fundamentals and Applications, pp. 127-136, 2002. 

3-    M.L. Weaver, C.W. Calhoun and H. Garmestani, “Microstructure, Texture, and Mechanical Properties of Continuously Cast Gamma TiAl,” Journal of Materials Science, v. 37, n. 12, pages 2483-2490 (2002). 

4-    Iskandar, D. Reyes, Y. Gaxiola, E. Fudge, J, Foyos, E.W. Lee, P. Kalu, H. Garmestani, O.S. Es-Said, “The Effect of Varying the Solution Treatment Temperature, Natural Aging Treatment and Artificial Aging Treatment on the Mechanical Strength of 7249 Aluminum Alloy”, Materials Science Forum, Vols. 396-402 pp. 1121-1126, (2002) . 

5-     B.L. Adams, M. Lyon, B. Henrie, S.R. Kalidindi and H. Garmestani, “Spectral Integration of Microstructure and Design”, Materials Science Forum Vols. 408-412 (2002) pp. 493-498 . 

6-    H. Garmestani. S. R. Kalidindi, L. Williams, E. W. Lee, O. S. Es-Said, “Evolution of Anisotropy In Al-Li 2090-T8E41 Alloy: Experiments and Modeling”, The International Journal of Plasticity, pp 1373-1393, International Journal of Plasticity, Vol 18 Iss 10, Oct, 2002.  

6-    M. AlHaik, H. Garmestani, “A Composite Cylinder Model for the Prediction of Residual Stresses in Gamma Titanium Composites", Journal of Materials Engineering and Performance, Volume 11(5) October 2002.  

7-     Han K, Ishmaku A, Xin Y, Garmestani H, Toplosky VJ, Walsh R, Swenson C, Lesch B, Ledbetter H, Kim S, Hundley M, Sims JR Mechanical properties of MP35N as a reinforcement material for pulsed magnets, IEEE Transactions on Applied Superconductivity, 12 (1): 1244-1247 MAR 2002. 

8- A.D. Sheikh-Ali , D.A. Molodov , H. Garmestani, "Magnetically induced texture development in zinc alloy sheet", Scripta Materialia 46 (2002) 857–862. 
 

(Year 2001)

1-    H. Garmestani, S. Lin, B. Adams, S. Ahzi, “Statistical Continuum Theory for Texture Evolution of Polycrystals”, Journal of the Mechanics and physics of Solids 49, (2001) 589-607. 

2-    A. D. Sheikh-Ali; H. Garmestani, “On the independent behavior of grain boundary sliding and intragranular slip during superplasticity”, Trans Tech Publications, Materials Science Forum, vol. 357-359, pp. 393-398, 2001.  

3-     H. Garmestani,  M. Vaghar, E. W. Hart, “A unified model for inelastic deformation of polycrystalline materials –application to transient behavior in cyclic loading and relaxation”, International Journal of Plasticity. volume 17, no. 10, pp 1367-1391October, 2001. 

4-    Y. Xin, K. Han, N. Mateeva, H. Garmestani, P.N. Kalu, K. H. Dahmen, “Microstructures of La(1-x)A(x)(A = Ca or Sr)MnO3-delta thin films by liquid-delivery metalorganic chemical vapor deposition”, Journal of Materials Research, 16 (11): 3073-3083 NOV 2001. 

5-    M. Al_Haik, H. Garmestani, “Durability Study of a Polymeric Composites for Structural Applications”, Journal of Polymer Composites, vol. 22, No. 6, December 2001. 

6-    H. Garmestani, M. A. Zikry, “Inelastic Deformation and Failure”, International Journal of Plasticity, Editorial, Volume 17, Issue 10, October 2001, Pages 1303-1304.

7-    B. L. Adams, A. Henrie, B. Henrie, M. Lyon, S. R. Kalidindi, H. Garmestani, “Microstructure-Sensitive Design of A Compliant Beam”, J.  Mech Phys. Solids 49 (8): 1639-1663 Aug 2001. 

8-    L. Meda, L Kennon, Cristiane Bacaltchuk, H. Garmestani, K. H. Dahmen, “Effects of thermal annealing on the texture of La0.67Sr0.33MnO3 thin films”, Journal of Materials Research, July 2001 Vol. 16, No. 7.  

9-    D. Li, H. Garmestani, S. Kalidindi, and R. Alamo, “Crystallographic Texture Evolution in High Density Polyethylene During Uniaxial Tension”, Polymer, Vol. 42, (2001), pp. 4903-4913. 

10-    A. D. Sheikh-Ali; H. Garmestani, “On the independent behavior of grain boundary sliding and intragranular slip during superplasticity”, Trans Tech Publications, Materials Science Forum, vol. 357-359, pp. 393-398, 2001.  

12-    L. Meda, C. Bacaltchuck, K.H-Dahmen, H. Garmestani, “Residual strain and texture in strontium-doped lanthanum manganite thin films”, J. Mater. Sci. Mater. Electron 12, 143-146 (2001). 

12-    R. Vaghar, H. Garmestani, “Three Dimensional Stress Analysis of Superconducting Magnets Using Green's Function Solution", Journal of Applied Mechanics. J App. Mech-T ASME 68 (1): 11-18 Jan 2001. 

13-    M. Al-Haik, M.R. Vaghar, H. Garmestani, M. Shahawy, “Viscoplastic analysis of structural polymer composites using stress relaxation and creep data”, Composites: Part B 32 (2001) 165–170. 

14-    H. Garmestani, M. Al-Haik, T. A. Townsley and C. Sabinash, "Residual Stress Development During Fabrication and Processing of Gamma-Titanium Based Composites,” Scripta Met. Volume 44:1, pp 179-185, Jan, 2001. 

(Year 2000)

1-    H. Garmestani, S. Lin, “Statistical Continuum Mechanics Analysis of an Elastic Two-Isotropic-Phase Composite Material”, Journal of Composites: Part B, vol. 31, (2000) 39-46. 

2-     H. Garmestani, X. Dong, L. Brandao, H. Dahmen, “Texture analysis in LD-MOCVD Processed Thin Film Giant Magnetoresistant (LaM)MnO3 Materials”, Journal of Textures and Microstructures, Vol 34/2-3, pp 65-74, 2000. 

3-    S. Lin, H. Garmestani, B. Adams, “The Evolution of Probability Functions in an Inelastically Deforming Two-Phase Medium”, International journal of solids and structures, Vol. 37, N. 3, pp. 423, 2000.  

4-    M. Trinca, A. Avalino, H. Garmestani, J. Foyos, E. W. Lee and O. S. Es-Said, “Effect of Rolling Orientation on the Mechanical Properties and Crystallographic Texture of 2195 Aluminum-Lithium Alloy”, Materials Science Forum Vols 331-337, P849-854, 2000. 

(Year 1999)

1-     F. Booeshaghi and H. Garmestani, “On the Application of Load Relaxation in Characterizing Superplastic Al-Li 8090 Over Large Strain-Rate Regimes”, Journal of Scripta Materialia, P-1359-6462, Volume : 40, Issue  : 4, 15-Feb-1999 . 

2-    D. W. Markiewicz, M. R. Vaghar, Iain R. Dixon, “Generalized plane strain analysis of superconducting solenoids”, H. Garmestani, Journal of applied physics., Vol. 86, N. 12, pp. 7039, 1999. 

3-    H. Garmestani, K. Harris, “Orientation Determination by EBSP in an Environmental Scanning Electron Microscope”, Scripta Materialia 41: (1) 47-53 JUN 4 1999. 

4-    E. W. Lee, P. N. Kalu, L. Brandao, O. S. Es-Said, J. Foyos, H. Garmestani, “The effect of off-axis thermomechanical processing on the mechanical behavior of textured 2095 Al-Li alloy”, Journal of Materials Science and Engineering, A265 (1999), P100-109. 

5-    M.L. Weaver, L.P.M. Brandao, E.S. Gillman, K.H. Dahmen, and H. Garmestani, “Microcharacterization of LD-MOCVD Processed Thin Film Materials Exhibiting Giant Magnetoresistance,” Journal of Materials Research, Vol. 14, No. 5, May 1999. P2001-2007. 

(Year 1998)

1-    S. Lin, B. L. Adams, “Statistical continuum theory for inelastic behavior of two-phase medium”, H. Garmestani,  Int. J. Plasticity 14: (8) 719-731 (1998). 

2-    F. Booeshaghi, H. Garmestani, “On the Existence of a Threshold Stress in Al-Li Superplastic Materials”, Scripta Materialia, Vol. 38, No. 1, p. 89-94,1998. 

3-    N. Bednar, H. Garmestani, “Biaxial Testing of High Strength Carbon Fiber Composite Cylinders for Pulsed Magnet reinforcement”, Journal of Composites, Part A:  Applied Science and Manufacturing, 30/2, 147-152 Dec.1998. 

4-    M.A. Zikry H. Garmestani, “Deformation and failure modes in multiphase materials”, Special issue: Int. J. Plasticity 14: (8) 671-671 (1998).

5-     H. Garmestani, P. Kalu, D. Dingley, “Micro-characterization of Al-8090 Superplastic Materials using Orientation Imaging Microscopy”, Journal of Materials Science and Engineering A. volume 242/1-2. pp 284-291, February 1998. 

6-    M. L. Weaver, H. Garmestani, “Microstructures and Mechanical Properties of Commercial Titanium Foils Processed via the Melt Overflow Process”, Materials Science and Engineering A, v. A247, pages 229-238 (1998). 

7-    K.E. Harris, F. Ebrahimi, and H. Garmestani, “Texture Evolution in NiAl”, Journal of Materials Science and Engineering A. Volume 247 (1998) 187-194 . 

(Year 1997 & Previous)

1-    H. Garmestani, F. Booeshaghi, P. Kalu, “Micromechanical Investigation and Phenomenological Modeling of Al-8090 Superplastic Materials”, Materials Science Forum, vol. 243-245, 1997, pp. 569-574. 

2-    J. Schwartz, Amm B. C., Garmestani H, et al., “Mechanical properties and strain effects in Bi2Sr2CaCu2Ox/AgMg composite conductors”, IEEE T APPL SUPERCON 7: (2) 2038-2041 Part 2 JUN 1997 . 

3-    R. Vaghar, H. Garmestani, D. Markiewics, “Elastoplastic Stress Analysis of Nb3Sn Superconducting Magnets”, Journal of Applied Physics, August 1996.Vol. 80, n4, p2490-2500, Aug 1996. 

4-    A. Cox, D. Markiewics, H. Garmestani, I. Dixon, “Power Series Stress Analysis of Solenoid Magnets”, IEEE Transactions on Magnetics VOL. 32. NO. 4. July 1996. 

5-    H. Garmestani, K. Harris, P. Kalu, “Orientation Imaging Microscopy in Environmental Scanning Electron Microscopy”, Journal Scanninig Microscopies, Vo. 20, 1 (1996).  

6-    S. Mukherjee, H. Garmestani, N. Chandra, "Experimental Investigation of Thermal Stresses in MMCs Using Backscattered Kikuchi Diffractomery Method", Scripta Metallurgica et Materialia, Vol. 33, No.1, pp. 93-99, February 1995. 

7-    H. Garmestani, R. Vaghar, D. Markiewics, N. Chandra, "Stress Analysis of an Anisotropic Work Hardening Cylinder with Body Forces", International Journal of Mechanics of Structures and Machines, Vol. 23, No.4, November 1995.  

8-    N. Chandra, K. Murali, and H. Garmestani, "Experimental and Numerical Investigation of Superplastic Deformation Mechanisms" Materials Science Forum Vols. 170-172 (1994) pp.47-52. 

9-    H. Garmestani, R. Vaghar,  W.D. Markiewics, "Concepts of Plasticity in Solenoid Stress Analysis," IEEE Transactions on Magnetics, VOL. 30, NO. 4, July 1994, PP. 2237-2240.  

10-    W.D. Markiewics, M. R. Vaghar, I.R. Dixon, and H. Garmestani, "Generalized Plane Strain Analysis of Solenoid Magnets," IEEE Transactions on Magnetics, VOL. 30, NO. 4, JULY 1994, PP. 2233-2236. 

11-     N. Chandra, C.R. Ananth, and H. Garmestani, "Micromechanical Modeling of Process-Induced Residual Stresses in Ti-24Al-11Nb/SCS-6 Composite," Journal of Composite Technology & Research, JCTRER, Vol. 16, No. 1, January 1994, PP. 37-46. 

12-    E.W. Hart, H. Garmestani, "Mechanical Testing Using Direct Control of the Inelastic Strain Rate", Journal of Experimental Mechanics, 33 (1), March 1993, pp 1-6. 

13-    C. R. Ananth, N. Chandra, H. Garmestani, "Process Induced Residual Stresses in Metallic/Intermetallic Matrix Composites", Computational Plasticity: Fundamentals and Applications, 1992, Ed. D.R.J. Owen, et. al., Pineridge Press, 2205-2216.

14-    H. Garmestani, E. W. Hart, “Controlled Inelastic Strain Rate Experiments”, JOM, J. Min. Met. Mat. Sci., vol 40, (7), A55, Jul 1988.

15-    Hamid Garmestani, Brent Adams, "Transient Small-Scale Yield Behavior of Textured Copper Tubing Under Biaxial Loading", Journal of Engineering Materials and Technology, 108, 127-134 April 1986. 

 

In Preparation:

1-    S.S. Sablin. M. Al-Haik, M.Y. Hussaini, H. Garmestani, " Molecular Simulations of Reinforcements Mechanisms in Carbon Nanotube Based Polymeric Composites,” Submitted to Physical Reviews Letters 

2-    X-ray diffraction calculation of residual stress in La0.67Sr0.33MnO3 thin films, L. Meda, S. Hayek, K. H. Dahmen, H. Garmestani, Mater. Sci. Eng..

3-    Influence of strain on the magnetic properties of La0.67Sr0.33MnO3 thin films, L. Meda, H. Garmestani, N. Mateeva, and K. H. Dahmen, Applied Physics Letters.

4-    Residual stress and epitaxial studies of LSMO thin Films, L. Meda, L. Kennon, and H Garmestani, Solid State Communications.

5-    X-ray diffraction study of LSMO thin films using grazing angle method, L.Meda and H. Garmestani, Journal of Crystal Growth.

 

Books Published:

1-    "Advances in Superplasticity and Superplastic Forming", Edited by N. Chandra, H. Garmestani, R. E. Goforth, A TMS Publication, Proceedings of a Symposium sponsored by the MDMD Shaping and Forming Committee, held at the TMS/ASM Materials Week 2-5 November, 1992.  

2-    Deformation and failure modes in multiphase materials”, Zikry MA, Garmestani H, Special issue: Int. J. Plasticity 14: (8) 671-671 1998.

3-    Special issue on: "Inelastic Deformation and Failure" in honor of Professor E.W. Hart on his 80th birthday – Editorial, INT J PLASTICITY 17 (10): 1303-1304 2001.

Laboratory Manual:

1-     "Experimental Methods in Solid Mechanics," H. Garmestani, Used for the junior level course in experimental mechanics in the Dept. of Mechanical Engineering at FAMU/FSU College of Engineering.

 

Proceedings:

1.    D.S. Li, H. Garmestani, “Processing Path of Crystal Orientation Coefficient during Plastic Deformation”, Dislocations, Plasticity and Metal Forming, ISBN 0-9659463-4-7, Published by NEAT Press, 2003, 487-489

2.    D.S. Li, H. Garmestani, “Prediction of Texture Coefficients Evolution During Bulk Deformation”, Twelfth Symposium on Processing and Fabrication of Advanced Materials, Oct. 2003.

3.    H. Garmestani, G. Saheli, D. L. Li, “Microstructure Sensitive Design of Two Phase composites”, 7th US National Congress on Computational Mechanics at Albuquerque, New Mexico, July 27-31, 2003.

4.      Frank Johnson,…Crystallization, Morphology and Magnetic Properties of Melt-spun (Nd,Pr,Dy)<sub>2</sub>(Fe,Co,Mo)<sub>14</sub>B/[[alpha]] Fe Nanocomposites ID: TMAG-03-10-0233, MMM conference

5.    BauZhi,..Induced anisotropy in FeCo-based nanocrystalline ferromagnetic alloys (HITPERM) by very high field annealing, ID: TMAG-03-10-0248

6.    H. Garmestani, G. Saheli, G. A. Castello-Branco, Brent Adams - AIAA, 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, Georgia, September 2003.

7.    C. M. B. Bacaltchuk, G. A. Castello-Branco, M. Ebrahimi, H. Garmestani and A. D. Rollett - Scripta Materialia, Vol. 48, issue 9 (2003), p.1343-1347.

8.    C. M. B. Bacaltchuk, G. A. Castello-Branco, M. Ebrahimi, H. Garmestani and A. D. Rollett - 2003 TMS ANNUAL MEETING · San Diego, California , March 2003.

9.    G.A.Castello-Branco, C.M.B.Bacaltchuk, H.Garmestani - Proceedings of the THERMEC’2003 Conference – Madrid, Spain - July/03

10. C.M.B.Bacaltchuk, G.A.Castello-Branco, H.Garmestani - Proceedings of the THERMEC’2003 Conference – Madrid, Spain - July/03

11. G.A.Castello-Branco, C.M.B.Bacaltchuk, S. L. Semiatin, S. E. Schoenfeld, H.Garmestani - Proceedings of the TI-2003, 10th International Conference in Titanium , Hamburg , Germany – July 2003

12. G.A.Castello-Branco, C.M.B.Bacaltchuk, S. L. Semiatin, S. E. Schoenfeld, H.Garmestani - 2003 MS&T '03: Materials Science & Technology, Symposium Name: General Abstracts 2003, Chicago , Illinoys, November 2003

13. G.A.Castello-Branco, C.M.B.Bacaltchuk, J. C. Fanning, H.Garmestani- 2003 MS&T '03: Materials Science & Technology 2003- Symposium:Processing and Properties of Structural Materials,Chicago, Illinoys, November 2003

14. C.M.B.Bacaltchuk, G.A.Castello-Branco, H.Garmestani - 2003 MS&T '03: Materials Science & Technology, Symposium: Processing-Structure-Property-Performance Relationships,Chicago, Illinoys, November 2003

15. Arun Gokali, A. Tewari H. Garmestani, Utility of geometric constrains for modeling two-point correlation functions, PLASTICITY 2003, Quebec City July 7-11

16. H. Garmestani A. Belvin, G. Saheli, H. Garmestani and B. L. Adams, Microstructure sensitive design for a two-phase composite material, PLASTICITY 2003, Quebec City July 7-11

17. D. Li; H. Garmestani, “Influence of Branch Length on the Texture Evolution of Linear Low Density Polyethylene”, Bulletin of America Physics Society, March meeting, 2002, 309

18. L. Zhu, A. J. Beaudoin, H. Garmestani and S. R. MacEwen “Stress Relaxation of a Work-Hardened Aluminum Magnesium Alloy and application to Hart’s model” TMS Annual Meeting, Columbus, Ohio, October 6-9th, 2002

19. S.S. Yan; M. Elkawni; D. Li; H. Garmestani etc, “Experimental and Theoretical study on Soft/Hard Exchange-coupled NiFe/SmFe Bilayers”, DARPA MetaMaterials PI Review, 2002, p22

20. “Statistical Mechanics Analysis of Heterogeneity”, Presented to IUTAM conference in Morocco , October 20-24th, 2002 , Marakesh , Morocco .

21. M.S. Al-Haik and H. Garmestani, G. Jefferson” Modeling of Process Induced Residual Stress in Gamma Titanium Composite”, The Materials Information Society  (ASM) 11th International Symposium on Processing and Fabrication of Advanced Materials, Materials Solutions Conference, Columbus Ohio , October 7-9 2002 .

22. H. Garmestani, G. Saheli, G. Bronco, Optimization of microstructure in Ti-6Al-4V using statistical continuum mechanics, Proceeding of the AIAA/ISSMO Symposium and Exhibit on Multidisciplinary Analysis and Optimization, Grand Hyatt Atlanta, Georgia, 4-6 September 2002.

23. G. Jefferson, H. Garmestani, B. L. Adams, Two point Distribution Functions and application to Co-Copolymers, Proceeding of the Plasticity Conference in Aruba, January 3-9, 2002.

24. H. Garmestani and B. L. Adams, Statistical continuum theory for characterization of heterogeneity using strain energy, Proceeding of the Plasticity Conference in Aruba , January 3-9, 2002 .

25. H. Garmestani, M. Fathi, G. Saheli, "Statistical Continuum Approaches Based On Parallel And Distributed Processing", The 2002 International Multi-conference in Computer Science, June 24-27 2002, Las Vegas, Nevada, USA.

26. M.S. Al-Haik and H. Garmestani, ” Creep Prediction of Carbon Fiber/Epoxy Composite Using Neural Network” WAC (World Automation Congress), Orlando FL , June 9-13, 2002 .

27. L. Zhu, A. J. Beaudoin, H. Garmestani and S. R. MacEwen “An Assessment of In-Service Stress Relaxation of a Work-Hardened Aluminum Magnesium Alloy” paper for the NUMISHEET conference in Korea , 2002.

28. S. R. Kalidindi, B. L. Adams, and H. Garmestani, Process design to achieve targeted microstructures, Proceeding of the Plasticity Conference in Aruba , January 3-9, 2002 .

29. G. Jefferson, B. L. Adams, S. Lin, R. Tannenbaum and H. Garmestani, Two point probability distribution functions: application to block co-polymer nanocomposites, Proceeding of the Plasticity Conference in Aruba , January 3-9, 2002 .

30. D. Li; H. Garmestani, “Texture Evolution in Ethylene-Octene Copolymer during Uniaxial Tension”, 50th Annual Denver X-ray Conference, Steamboat Springs , Colorado , July 2001

31. D. Li, H Garmestani, S.R Kalidini, R. Alamo, “Texture Evolution and Morphology Evolution in High Density Polyethylene during Uniaxial Tension”, Bulletin of America Physics Society, March meeting, 2001, 203

32. B. L. Adams, S. R. Kalidindi and H. Garmestani, “Spectral Representation of Microstructure Evolution in Polycrystals”, Proceeding of the TMS conference on Microstructure Modeling and Prediction During Thermomechanical Processing, Edited By:  Raghavan Srinivasan, S. L. Semiatin, Armand Beaudoin, Steven Fox, Zhe Jin, Held November 4-8, 2001 , Indianapolis , Indiana .

33. H. Garmestani, “A Constitutive Model for Cyclic Loading and Relaxation”, Proceeding of the ASME publication for constitutive modeling of advanced materials, Orlando, Nov. 5-8, IMECE 2000 Dr. Marwan Khraisheh.

34. Garmestani, M.S. Al-Haik and S. Downey , ”Durability Analysis of an Autoclave Structural Polymer Composite Using Stress Relaxation and Creep Data,” CANCOM 2001, Third Canadian International Composite Conference, Montréal ( Quebec ) Canada , August 21-24 2001 .

35. L. Meda, H. Garmestani, …“Residual Stress in Thin Films of Strontium-Doped Lanthanum Manganites” MRS, 2000 Spring Meeting, April 23-28, San Francisco , CA .

36. H. Garmestani, s. Lin, b. L. Adams, “statistical continuum theory for characterization of heterogeneity in an inelasticly deforming body” Proceeding of the Multi-scale Modeling by Nasr Goneim, LosAngeles,  8/21/2000

37. H. Garmestani1, S. R. Kalidindi2, L. Williams1, E. W. Lee3, O. S. Es-Said “Evolution of Anisotropy In Al-Li 2090-T8e41 Alloy”, Proceeding of the Plasticity 2000, Whistler, Canada, July 15-24, 2000.

38. H. Garmestani, B. L. Adams, “Statistical Continuum Theory for Characterization of Heterogeneity in an Inelastic Deforming Body”, Proceeding of ICCE/7 International Committee on Composite Engineering, Denver, Co, July 2- June 8, 2000

39. M.S. Al-Haik and H. Garmestani, ” Implicit Creep Model of Polymer Matrix Composites By Means Of Neural Network,” ICCE/7 Conference, Denver , Colorado , July 2-8, 2000 .

40. A.D. Sheikh-Ali, J.A. Szpunar and H. Garmestani, On the relationship between grain boundary sliding and intragranular slip during superplastic deformation, Superplasticity--Current Status and Future Potential (USA), Proceeding of MRS Fall Meeting, November 29 - December 3, 1999, Boston, Massachussets,193-198, 2000

41. H. Garmestani, M. Al-Haik and S. Lin,” Statistical Continuum Mechanics Representation of Material Heterogeneity Using Neural Networks,” WAC 2000 Conference, Maui , Hawaii June 11-16, 2000 .

42. H. Garmestani, S. Lin, “Statistical Continuum Theory for Inelastic Deformation of a Polycrystalline Medium”, Proceeding of ICCE/6 International Committee on Composite Engineering, Pullman , Washington , June 28-July3, 1999.

43. “Residual Stress and Texture in LD-MOCVD Processed Thin Film Giant Magnetoresistant (LaM)MnO3 Materials”, K/ H. Dahmen, Nelly N. Mateeva, X. Dong, L. Meta, H. Garmestani Proceeding of ICCE/6 International Committee on Composite Engineering, June 28-July3, 1999.

44. M. Al-Haik, H. Garmestani, and T. A. Townsley, ” A Concentric Cylinder Model for Residual Stress Prediction of High Temperature Titanium Aluminide Composite Materials,” ICCE/6, 6th Annual International Conference on Composites Engineering, Orlando Florida , June 27-July3 1999.

45. “Residual stress development during fabrication and processing of Gamma Titanium based composites”, M. Al-Haik, T. A. Townsley, C. Sabinash, Proceeding of ICCE/6 International Committee on Composite Engineering, June 28-July3, 1999.

46. “A phenomenological model for superplastic materials”, H. Garmestani and F. Booeshaghi, Proceedings of the Symposium on Superplasticity and Superplastic Forming, M. A. Khalil, Editor, As part of SES 98 Annual Meeting in Pullman, Wa, September 27-29, 1998.

47. H. Garmestani, Unified Modeling of Inelastic Deformation Including Strain Transients in Cyclic Loading and Relaxation”, Presented at the special Symposium to honor Hart’s 80th Birthday, Proceedings of SES 98 Annual Meeting in Pullman , Wa , September 27-29, 1998 .

48. Statistical Continuum Mechanics Analysis of Composite Materials, H. Garmestani, S. Lin, B. Adams, Proceeding of the ICCE/5-International Committee on Composite Engineering, July 5-11, 1998 in Las Vegas.

49. “Mechanical and Microscopy Analysis of Carbon Composites during high Temperature Application”, Shahawy, H. Garmestani, C. Goins,  M. AlHaik, Proceeding of the ICCE/5-International Committee on Composite Engineering, July 5-11, 1998 in Las Vegas

50. “Residual Stress and Texture in LD-MOCVD Processed Thin Film Giant Magnetoresistant (LaM)MnO3 Materials”, M.  Li,  E. Gillman, K.-H. Dahmen, X. Dong , L. Brandao, H.  Garmestani, Proceeding of the ICCE/5-International Committee on Composite Engineering, July 5-11, 1998 in Las Vegas .

51. “A Phenomenological Model For Aluminum Based Superplastic Materials”, H. Garmestani and F. Booeshaghi Proceedings of the International Conference on Plasticity by the International Committee on Plasticity, Juneau , Alaska , July 13-17, 1997

52. “Unified Modeling of Cyclic Loading and Relaxation”, H. Garmestani Proceedings of the International Conference on Plasticity by the International Committee on Plasticity, Juneau , Alaska , July 13-17, 1997 .

53. “Phenomenological Modeling of Superplastic Al-7475”, F. Booeshaghi, H. Garmestani, P. N. Kalu, Light Weight Alloys for Aerospace Applications IV.  Edited by E. W. Lee, W. E. Frazier, N. J. Kim, and K. Jatta.  The Minerals, Metals & Materials Society, 1997.

54. “Microstructural and Mechanical Properties Evaluations of Titanium Foils Processed via the Melt Overflow Process”, in NASA ACE Center Series: Proceedings of the NASA University Center Technical Conference on Education, Aeronautics, Space, Autonomy, Earth and Environment (URC_TC’97), ACE Center Press, Albuquerque, NM, vol,. 1, pages 925-929 (1997).

55. “Texture Studies of Gamma Titanium Aluminide Sheets produced by melt overflow rapid solidification”, M. L. Weaver, H. Garmestani, G. Das, in High Ordered Intermetallic Alloys VII, Mat. Res. Soc. Symp. Proc., v. 460, pages 243-248 (1997)

56. “A Novel Microcharacterization Technique in the Measurement of Strain and Orientation Gradient in Advanced Materials”, H. Garmestani, K. Harris, L. Lourenco, Proceedings of the NASA University Research Centers,  in NASA ACE Center Series: Proceedings of the NASA University Research Center Technical Conference on Education, Aeronautics, Space, Autonomy, Earth and Environment (URC_TC’97), ACE Center Press, Albuquerque, NM, vol. 1, pages 931-936 (1997).

57. “Microstructural and Mechanical Properties Evaluations of Titanium Foils Processed via the Melt Overflow Process”, M.L. Weaver and H. Garmestani,  in NASA ACE Center Series: Proceedings of the NASA University Research Center Technical Conference on Education, Aeronautics, Space, Autonomy, Earth and Environment (URC_TC’97), ACE Center Press, Albuquerque, NM, vol. 1, pages 925-929 (1997).

58. M.L. Weaver and H. Garmestani, “Texture Studies of Gamma Titanium Aluminide Sheets Produced By Melt Overflow Rapid Solidification,” to appear in the proceedings of the Materials Research Society Fall Meeting vol. 460, session on High Temperature Ordered Intermetallic Alloys VII, Boston, MA, Materials Research Society, November 1996.

59. “Microstructural Characterization of Al8090 Superplastic Materials Using Orientation Imaging Microscopy“, Proceeding of the Microscopy Society of America Meeting in Kansas City , August 13-17, 1995 .  P

60. “Low Cycle Fatigue of High Temperature Composite Materials”,  N. Fox, H. Garmestani, Proceedings of the Second International Conference on Composite Engineering, Aug. 20-24, 1995 . p237-238

61. “Measurement of Thermal Stresses Using Non-Uniform Thermal Expansion in Inhomogeneous Materials”, H. Garmestani, L. Lourenco, M. Gholami, M. Ebrahimi,  Proceedings of the Second International Conference on Composite Engineering, Aug. 20-24, 1995 . PP245-246

62. “Multi-Axial Investigation of High Field Composite Solenoids”, A. Cox, H. Garmestani, D. Markiewics, I. Dixon , Proceedings of the Second International Conference on Composite Engineering, Aug. 20-24, 1995 . PP167-168.

63. “Elastic-Plastic Analysis of a Composite Cylinder with Body Forces”,  M. R. Vaghar, H. Garmestani, Proceedings of the Second International Conference on Composite Engineering, Aug. 20-24, 1995 . PP 769-770

64. “Microstructural Evolution and Characterization of Al-8090 Superplastic Materials”, H. Garmestani, P. Kalu, D. Dingley, Proceeding of the Light Weight Alloys for Aerospace Applications III, 124th Annual Meeting of TMS, Feb 12-16, 1995., PP177-187.

65. “Rheological Modeling of Superplasticity”, F. Booeshaghi, H. Garmestani, Proceedings of the 32nd annual meeting of the Society of Engineering Sciences, October 29-November 2, 1995. 169-170

66. “Statistical Continuum Theory for Inelastic Behavior of a Two-Phase Medium”, H. Garmestani, S. Lin, B. Adams, Proceedings of the 32nd annual meeting of the Society of Engineering Sciences, October 29-November 2, 1995.

67. “Neural Network Based Simulation of Transient Behavior of Aluminum-1100”, Feteih, S., Tsai, J. Booeshaghi, Proceedings of the 32nd annual meeting of the Society of Engineering Sciences, October 29-November 2, 1995. 155-156

68. “Microscopic Strain Field Analysis”, K. Harris, H. Garmestani, L. Lourenco, Proceedings of the 32nd annual meeting of the Society of Engineering Sciences, October 29-November 2, 1995. 211-212

69. “Stress Analysis of a Superconducting Solenoid Using Green’s Function Solution”, M.R. Vaghar and H. Garmestani, Proceedings of the 32nd annual meeting of the Society of Engineering Sciences, October 29-November 2, 1995. 631-632

70. "Statistical Continuum Theory For Inelastic Behavior of A Two-Phase Medium", H. Garmestani, Proceedings of the 14th Imacs World congress on Computational and Applied Mathematics, Atlanta, Georgia, July 11-15, vol. 1, pp 183, 1994.

71. "Investigation of Deformation Mechanisms of Superplastic Materials Using Diffraction Patterns", H. Garmestani, G.S. Sohi, S. Mukherjee, N. Chandra, Superplasticity and Superplastic Forming of Advanced Materials, 10 Pages, Ed. N. Chandra et. al., TMS Publications, 1993.

72. "Experimental and Numerical investigation of Superplastic Forming", N Chandra, H. Garmestani, International Conference on Superplasticity in Advanced Materials, ICSAM'94, May 24-26, 1994, Moscow, Russia.

73. "Effect of Interfacial Properties on the Transverse Mechanical Behavior of Metallic/Intermetallic Matrix Composites- A Computational Study," C.R. Ananth., N. Chandra, K. Murali, H. Garmestani, Proceedings of the Fall meeting of The Minerals, Metals, & Materials Society (TMS) and ASM International, Pittsburgh, PA, October 17-21, 1993. TMS Publication.

74. "Elastoplastic Analysis of Process Induced Residual Stresses in Metallic/Intermetallic Matrix Composites", C. R. Ananth, N. Chandra, H. Garmestani, Proceeding of the International Conference on computational plasticity, Barcelona, Spain, April 5-7,1992.

75. "Process Induced Residual Stresses in Metallic/Intermetallic Matrix Composites", C. R. Ananth, N. Chandra, H. Garmestani, Computational Plasticity: Fundamentals and Applications, 1992, Ed. D.R.J. Owen, et. al., Pineridge Press, 2205-2216.

76. “Controlled Inelastic Strain Rate Experiments”, Garmestani H., Hart E. W., JOM-J Min Met Mat S 40: (7) A55-A55 Jul 1988

77. Biaxial small strain yield behavior in single-phase metal tubes,” Adams B. L., Raghavan R. K. , Garmestani H., JOM-J MIN MET MAT S 36: (7) 60-60 1984

 

PRESENTATIONS AND INVITED TALKS:  

1.      “Microstructure Representation and Optimization Using Statistical Continuum Approaches”, Presented to the weekly department seminar at University of Texas in Dallas , Texas   on December 19, 2002 .

2.      "Modeling of Residual stress in two phase composites", H. Garmestani, M. Haik, G. Jefferson, TMS Annual Meeting, Columbus , Ohio , October 6-9th, 2002 .

3.      “Statistical Mechanics Analysis of Heterogeneity”,  Presented to IUTAM conference in Morocco , October 20-24th, 2002 , Marakesh , Morocco

4.      “Advanced Processing and Characterization for Texturing of Materials”, Presented to Materials Science and Engineering at Drexel, January 28, 2002 .

5.      H. Garmestani and B. L. Adams, Statistical continuum theory for characterization of heterogeneity using strain energy, Plasticity Conference in Aruba , January 3-9, 2002 .

6.      B. L. Adams, S. R. Kalidindi and H. Garmestani, “Spectral Representation of Microstructure Evolution in Polycrystals”, TMS conference on Microstructure Modeling and Prediction During Thermomechanical Processing, Edited By:  Raghavan Srinivasan, S. L. Semiatin, Armand beaudoin, Steven Fox, Zhe Jin, Held November 4-8, 2001, Indianapolis, Indiana.

7.      “Statistical Mechanics Modeling of Polycrystalline Materials”, Presented to the Mechanics and Materials Conference in SanDiego, June25-28, 2001.

8.      “Spectral And Statistical Mechanics Representation Of Microstructure Evolution” Presented to Wright Patterson Laboratory, Materials Division, May 24th 2001, (invited)

9.      “Advanced Processing and Micro-characterization Techniques for the Production of Highly Textured Nano-powdered Magnetic Materials”, Presented to NASA Langley Research, Newport News, May31, 2001. (Invited)

10.  “Evolution Of Texture And Anisotropy in Al-2090 Precipitation Hardening Alloys”, Presented to the Second International Conference on Light Materials, Busan, Korea, May 6-9, 2001.

11.  “Microstructure Sensitive Design”, Presented to the Second International Conference on Light Materials, Busan, Korea, May 6-9, 2001.

12.  “Residual Stress in Thin Films of Strontium-Doped Lanthanum Manganites” MRS, 2000 Spring Meeting, April 23-28, San Francisco, CA

13.  “Statistical Continuum Theory for Inelastic Deformation of a Polycrystalline Medium”, H. Garmestani, S. Lin, Proceeding of ICCE/6 International Committee on Composite Engineering, June 28-July3, 1999.

14.  “Residual Stress and Texture in LD-MOCVD Processed Thin Film Giant Magnetoresistant (LaM)MnO3 Materials”, K/ H. Dahmen, Nelly N. Mateeva, X. Dong, L. Meta, H. Garmestani Proceeding of ICCE/6 International Committee on Composite Engineering, June 28-July3, 1999.

15.  “Residual stress development during fabrication and processing of Gamma Titanium based composites”, M. Al-Haik, T. A. Townsley, C. Sabinash, Proceeding of ICCE/6 International Committee on Composite Engineering, June 28-July3, 1999.

16.  “A phenomenological model for superplastic materials”, H. Garmestani and F. Booeshaghi, Proceedings of the Symposium on Superplasticity and Superplastic Forming, M. A. Khalil, Editor, As part of SES 98 Annual Meeting in Pullman, Wa, September 27-29, 1998.

17.  “Unified Modeling of Inelastic Deformation Including Strain Transients in Cyclic Loading and Relaxation”, H. Garmestani, Presented at the sepecial Symposium to honor Hart’s 80th Birthday, Proceedings of SES 98 Annual Meeting in Pullman, Wa, September 27-29, 1998.

18.  Statistical Continuum Mechanics Analysis of Composite Materials, H. Garmestani, S. Lin, B. Adams, Proceeding of the ICCE/5-International Committee on Composite Engineering, July 5-11, 1998 in Las Vegas.

19.  “Mechanical and Microscopy Analysis of Carbon Composites during high Temperature Application”. Shahawy, H. Garmestani, C. Goins,  M. AlHaik, Proceeding of the ICCE/5-International Committee on Composite Engineering, July 5-11, 1998 in Las Vegas

20.  “Residual Stress and Texture in LD-MOCVD Processed Thin Film Giant Magnetoresistant (LaM)MnO3 Materials”, M. Li,  E. Gillman, K.-H. Dahmen, X. Dong , L. Brandao, H.  Garmestani, Proceeding of the ICCE/5-International Committee on Composite Engineering, July 5-11, 1998 in Las Vegas.

21.  “Statistical Continuum Theory for Microstructure Evolution of an Inelastic Heterogeneous Medium”, Invited talk at the Mutiscale Modeling of Materials Organized by the Institute of Materials and the National Livermore Lab. April 9-11, 1997. SanDiego California.

22.  “State Variable Modeling of Relaxation and Cyclic Loading”, Presented at the National Instititute of Standards and Technology, July 18, 1997.

23.